MANUFACTURING • ENGINEERING • SUPPLING • EPC CONTRACTING ◉ Global Solutions for a More Reliable Tomorrow
HV EQUIPMENT · DISCONNECTORS

HV Disconnector Switches

The center-break disconnector has two contact arms open and closes the circuit at the midpoint between two insulators.

♦ Double Break

♦ Vertical Break

♦ Pantograph

HV DISCONNECTOR / ISOLATION FUNCTION
HV
CIRCUIT
— VISIBLE
ISOLATION
— MAINTENANCE
INTERFACE
Conceptual isolation function; real equipment operation follows procedures.
PRODUCT SCOPE

♦ Centre Break

LMZ original real photograph of high voltage centre break disconnector Centre Break disconnector — original LMZ detail

The center-break disconnector has two contact arms open and closes the circuit at the midpoint between two insulators. This is the most commonly used and cheap type of disconnector in the substation due to its design. ♦ Rated voltage: up to 550 kV ♦ Rated continuous current: up to 6300 A ♦ Rated short-time withstand current: up to 63 kA

Up to 550 kV · Up to 6300 A · Up to 63 kA

♦ Double Break

Original LMZ HV disconnector source photo c3 Double Break disconnector — original LMZ photo

The double-break disconnector has one arm moved by the central insulator supporting it and closes the circuit on two fixed contacts, each of them placed on one of the two side insulators. ♦ Rated voltage: up to 550 kV ♦ Rated continuous current: up to 6300 A ♦ Rated short-time withstand current: up to 63 kA

Up to 550 kV · Up to 6300 A · Up to 63 kA

♦ Vertical Break

Original LMZ HV vertical-break disconnector Original LMZ HV disconnector detail

The vertical-break disconnector . one side connected to support and another side of the contact move vertically and open to consists of one arm which, by moving on the plane of the insulators supporting it. The vertical operating mechanism makes phase-to-phase spacing is minimized. It is a good solution for mobile substations and special applications. ♦ Rated voltage: up to 550 kV ♦ Rated continuous current: up to 6300 A ♦ Rated short-time withstand current: up to 63 kA

Up to 550 kV · Up to 6300 A · Up to 63 kA

♦ Pantograph

Original LMZ HV disconnector detail Pantograph disconnector — original LMZ detail

The pantograph disconnector has two joined half-arms and they are moving in vertically on the plane of the insulators, close the circuit on a fixed contact connected to the upper busbar. Pantograph disconnectors allow minimizing the substation area and ensure the maintenance of the bay without putting the upper busbar out of service. ♦ Rated voltage: up to 550 kV ♦ Rated continuous current: up to 6300 A ♦ Rated short-time withstand current: up to 63 kA

Up to 550 kV · Up to 6300 A · Up to 63 kA

SYSTEM APPLICATION

HV Disconnector Switches

It is a good solution for mobile substations and special applications.

This is the most commonly used and cheap type of disconnector in the substation due to its design.

It is a good solution for mobile substations and special applications.

Pantograph disconnectors allow minimizing the substation area and ensure the maintenance of the bay without putting the upper busbar out of service.

Back to HV Equipment
[gtranslate widget_look="dropdown_with_flags"]